Stage Technologies Acrobat Flyrail Theater Rigging Controller Roacdcase Included

Description

Available now is this Stage Technologies theatrical rigging controller with roadcase. This unit is in overall good condition and was removed from a working install, although the hard drives were removed so they will need replaced and software is not included. Due to the size and weight of this item it will be shipped via ground freight to a location located in the lower 48 states only, please let us know if you have any other questions.
If returns are offered on any item the details below will apply so please read prior to purchase:
-Minimum 20% restocking fee regardless of return reason (exceptions include shipping damage)
-We will not accept returns on any item listed as new that has been opened or installed
-Buyer will pay return shipping costs, item must be sent fully insured via the same carrier it was sent by and in all the original packaging otherwise item will be refused
-It is buyers responsibility to ensure the item is repackaged safely for transport
-If free shipping was offered we reserve the right to deduct our initial shipping cost from the return
-Returns must include every item we sent out ie: adapters or installation hardware
-If you sign for a damaged package you are 100% responsible for that item and return will be declined
-No returns accepted on any item listed as "sold for parts or repair"
-If an item is received in any other condition besides how it was sent out, including opened or tampered with, we reserve the right to deduct minimum of 50% or refuse the return completely
ProX XT-BT1210 BLK 10Ft BoltX Black Bolted 12 Inch Professional Box Truss Segment | 3mm Wall
Description
ProX XT-BT1210 BLK BoltX™
Professional Box Truss is designed and engineered for high quality and for many applications like stage lighting, concerts, Ninja Obstacle Course type construction, and similar uses.  Setting ourselves apart from other box truss manufacturers BoltX™ has an innovative end plate designed and manufactured with heavy-duty aluminum material, welded on both sides, and our exclusive circular rings at each corner of the truss to reduce or eliminate damage to the main chord ends.  Since box trussing is often dropped or is dragged along concrete floors, this design will substantially lessen the need for expensive repairs to the tubes from the mishandling of the truss sections.  Our outstanding quality control and manufacturing techniques assure excellent fitment at every connection to expedite your setups.
Compatible with most other 12″ Professional Box Truss Manufacturers utilizing 6.75" bolt center pattern.
Each section of truss includes one set of Four 5/8" - 11 x 2.5" (NC) attachment bolts, nuts, flat & lock washers.
IMPORTANT NOTE:
All bolts in a span of truss must face the same direction, and truss uprights need to have the bolts on top, nuts on the bottom.  When you are tightening the bolts, always wrench down with your ratchet from the nut side, and only turn a few cranks past firm. Bolts should be inspected on a regular basis.  Washers must be used on both sides of a connection.  Bolt sets should be replaced periodically as normal use degrades the threads on both the bolt and the nut.    If you over-tighten your bolts you risk seriously damaging or even breaking them.  Remember that any time you are bolting truss, safety is of the highest importance.  This is not a subject to be taken lightly.  Before raising a bolted box truss build, one person should inspect all truss connections and the rigging.
Features
ProX Live Performance Gear® recommends that you engage the services of a licensed engineering professional for complex loading configurations and/or conditions.
12″ H x 12” W Professional Box Truss W/Bolt Connection.
Industry Standard Bolt Pattern 6 3/4" x 6 3/4" with 5/8" Holes
Load Tested & Inspected During Manufacturing and Quality Control
Includes one set of Four 5/8" - 11 x 2.5" (NC) attachment bolts, nuts, flat & lock washers.
Compatible with most other 12″ Professional Box Truss Manufacturers
Outer Tube Diameter of 2″, Wall Thickness 3mm (1/8″), Diagonal 1”, Wall of 3mm (1/8″),
Welded to TÜV standards, 6082-T6 Alloy by GSI SLV-certified welders
Weight: 62 Lbs.
Finish: Black Coated aluminum
TUV
is a 3rd Party Certification Body and a Nationally Recognized Testing Laboratory (NRTL).  TUV provides inspections, testing, certification & training, with the ultimate objectives of reliability, safety & high quality.
ProX BoltX™ Truss products utilize industry-standard dimensions to be compatible to connect to/ and work with many other manufacturers 12 In. Bolted Box trussing products.
To Fit
Compatible with most other 12″ Professional Box Truss Manufacturers
Dimensions
120.00"L x 12.00"W x 12.00"H
Weight: 62.00 lbs
Shipping Dimensions
121.00"L x 13.00"D x 13.00"H
Shipping Weight: 73.00 lbs
UPC
019372414452